• Power liftgate open/close button - smart key (1)/inside the vehicle (2)

  When the liftgate is closed, press and hold the power liftgate open/close button. The liftgate will open automatically and the warning chime will sound. Press the liftgate open/close button again to stop the operation.

  When the liftgate is opened, press and hold the power liftgate open/close button. The liftgate will close automatically and the warning chime will sound. Press the power liftgate open/close button until the liftgate is closed completely. If the liftgate open/close button is not pressed while closing, power liftgate will stop operate and warning chime will sound for approximately 5 seconds.

• Power liftgate open button - outside the vehicle (3)

  When the smart key is detected, press the power liftgate open button. The liftgate will open and the warning chime will sound. If the doors are unlocked, the liftgate can be opened or closed without the smart key.

• Power liftgate close button - inside the vehicle (4)

  Press the power liftgate close button. The liftgate will close and the warning chime will sound.

During power opening or closing if the power liftgate senses any obstacle, the power liftgate will stop and move in the opposite direction.

The auto reverse function may not work if objects are too soft or thin, or if the liftgate is almost fully closed near the latched position.

Caution should be taken to prevent any objects from obstructing the liftgate opening.

If the automatic reverse feature operates more than two times while attempting to open or close the liftgate, the power liftgate may stop at that position. If this occurs, carefully close the liftgate manually, and then try to operate the power liftgate automatically again.

• The power liftgate does not open when the vehicle is in motion. The chime will sound if you drive with the liftgate opened. Stop your vehicle immediately at a safe place and check if your liftgate is opened.

• Operating the power liftgate more than 5 times continuously could cause damage to the operating motor. If this occurs, the power liftgate system enters into thermal protection mode to prevent the motor from overheating. In thermal protection mode, the power liftgate will not operate. If any of the power liftgate buttons are pressed to try to open the liftgate, the chime will sound 3 times but the liftgate will remain closed. Allow the power liftgate system to cool for about 1 minute before operating the system again.