Lighting control
The light switch has a Headlight and a Parking light position.
To operate the lights, turn the knob at the end of the control lever to one of the following positions:
-
OFF position
-
AUTO light position
-
Position & Taillamp
-
Headlamp (Low beam)
Position & Taillamp 
When the light switch is in the parking light position, the tail, license and instrument panel lights will turn ON.
Headlamp (Low beam) 
When the light switch is in the headlamp (Low beam) position, the head, tail, license lights will turn ON.
The EV button must be in the ON position to turn on the headlights.
AUTO light
When the light switch is in the AUTO light position, the taillights and headlights will turn ON or OFF automatically depending on the amount of light outside the vehicle.
When the light switch is positioned at an auto light position, at first, the wiper will turn on and then, after 5 seconds the head lamp will turn on automatically.
If the head lamp has been turned on due to this function of the vehicle, the head lamp will turn off 60 seconds after the wiper has been turned off.
-
Never place anything over the sensor (1) located on the instrument panel, as this will ensure better auto-light system control.
-
Do not clean the sensor using a window cleaner. The cleaner may leave a light film which could interfere with sensor operations.
-
If your vehicle has window tint or other types of metallic coating on the front windshield, the auto light system may not work properly.