When the vehicle is ready to be driven.

• ON: Normal driving is possible.

• OFF: Normal driving is not possible, or a problem has occurred.

• Blinking: Emergency driving.

When the ready indicator goes OFF or blinks, there is a problem with the system. In this case, have your vehicle inspected by an authorized Kia dealer.

This indicator appears when the charging cable is connected.

• When the EV button is in the ON position.

  • It appears for approximately 3 seconds and then goes off.

• When there is a malfunction with the ESC system.

  In this case, have your vehicle inspected by an authorized Kia dealer.

While the ESC is operating.

* For more details, refer to More Details.

• When the EV button is in the ON position.

  • It appears for approximately 3 seconds and then goes off.

• When you deactivate the ESC system by pressing the ESC OFF button.

* For more details, refer to More Details.

• When the vehicle detects the smart key in the vehicle with the EV button in the ACC or ON position.

  • Once the smart key is detected, you can start the vehicle (READY indicator ON).

  • The indicator light goes off after starting the vehicle (READY indicator ON).

• When the smart key is not in the vehicle.

  • At this time, you cannot start the vehicle.

• If the smart key is in the vehicle and the EV button is ON, but the vehicle cannot detect the smart key.

  In this case, have your vehicle inspected by an authorized Kia dealer.

• When the battery of the smart key is weak.

• When there is a malfunction with the immobilizer system.

  In this case, have your vehicle inspected by an authorized Kia dealer.

• When you turn the turn signal light on.

If any of the following occurs, there may a malfunction with the turn signal system.

In this case, have your vehicle inspected by an authorized Kia dealer.

• The indicator light does not blink but appears.

• The indicator light blinks more rapidly.

• The indicator light does not appear at all.

• When the headlights are on.

• When the headlights are on and in the high beam position.

• When the turn signal switch is pulled into the Flash-to-Pass position.

• When High Beam Assist is activated.

• When the tail lights or headlights are on.

• White: When you activate the AUTO HOLD system by pressing the AUTO HOLD button.

• Green: When you stop the vehicle completely by depressing the brake pedal with the AUTO HOLD system activated.

• Yellow: When there is a malfunction with the AUTO HOLD system.

In this case, have the vehicle inspected by an authorized Kia dealer.

* For more details, refer to More Details.

The Lane Safety indicator light will appear when you turn Lane Keeping Assist on by pressing and holding the Lane Driving Assist button.

If there is a problem with the function, the yellow Lane Safety indicator will appear.

Lane Following Assist indicator will appear when you turn Lane Following Assist on by pressing Lane Driving Assist button.

If there is a problem with the function, the yellow Lane Following Assist indicator will appear.

• Green: When Highway Lane Change Assist is ready for operation.

• Grey: When Highway Lane Change Assist is in standby.

• Green: When Highway Lane Change Assist is operating.

• White: When Highway Lane Change Assist is canceled.

• When you select each mode as drive mode.

* For more details, refer to More Details.