Blind-Spot Collision-Avoidance Assist (BCA) (if equipped)
Blind-Spot Collision-Avoidance Assist is designed to help detect and monitor approaching vehicles in the driver's blind spot area and warn the driver of a possible collision with a warning message and audible warning.
In addition, if there is a risk of collision when changing lanes or driving forward out of a parking space, Blind-Spot Collision-Avoidance Assist will help avoid collision by applying the brake.
Blind-Spot Collision-Avoidance Assist helps detect and inform the driver that a vehicle is in the blind spot.
The detecting range may vary depending on the speed of your vehicle. However, even if there is a vehicle in the blind spot area, the function may not warn you when you pass by at high speeds.
Blind-Spot Collision-Avoidance Assist helps detect and inform the driver that a vehicle is approaching at high speed from the blind spot area.
Warning timing may vary depending on the speed of the vehicle approaching at high speed.
When changing lanes by detecting the lane ahead, if Blind-Spot Collision-Avoidance Assist judges that there is a collision risk with an approaching vehicle in the blind spot, it will help avoid collision by applying the brake.
When you are driving forward out of a parking space, if Blind-Spot Collision- Avoidance Assist judges that there is a collision risk with an approaching vehicle in the blind spot, it will help avoid collision by applying the brake.
Detecting sensor
Refer to the picture above for the detailed location of the detecting sensors.
Take the following precautions to maintain optimal performance of the detecting sensor:
-
Never disassemble the rear corner radar or radar assembly, or apply any impact on it.
-
If there is impact on the rear corner radar or near the radar, even though the warning message does not appear on the cluster, Blind-Spot Safety system may not operate properly. Have the function be inspected by an authorized Kia dealer.
-
If the rear corner radars have been replaced or repaired, have the vehicle inspected by an authorized Kia dealer.
-
Use only genuine parts to repair the rear bumper where the rear corner radar is located.
-
Do not apply license plate frame or objects, such as a bumper sticker, film or a bumper guard near the rear corner radar.
-
Blind-Spot Collision-Avoidance Assist may not work properly if the bumper has been replaced, or the surroundings of the rear corner radar has been damaged or paint has been applied.
-
If a trailer, carrier or other equipment is installed, it may adversely affect the performance of the rear corner radar or the function may not operate.
For more details on the precautions of the front view camera, refer to More Details.