Turning ON Highway Lane Change Assist
OCV054065L

  1. Press OK button to enable Lane Change Assist

Highway Lane Change Assist is ready to operate when the function is ON and the following conditions are satisfied:

  • Highway Driving Assist is operating

  • Lane Following Assist is operating

  • A vehicle in the rear area of your vehicle is detected more than once after the vehicle is turned on

  • Your driving speed is above 37 mph (60 km/h)

  • When driving at low speeds, the vehicle can only be operated if the vehicles in the left and right adjacent lanes are recognized, and there is no risk of collision when changing lanes.

    Low speeds: 20–40 mph (30–60 km/h)

  • Hands-off warning is not displayed on the cluster

  • Hazard lights are OFF.

NOTE

  • While the Lane Change Assist function is ON, Lane Following Assist will not cancel, even if the turn signal indicator or hazard lights are operating.

  • Lane Change Assist automatically turns OFF when you drive in the following conditions:

    • There is 1 driving lane.

    • Roads lack physical center separations structures, such as guardrails.

    • Road with intersections or crosswalks ahead.

    • A pedestrian or cyclist is on the road ahead.

  • If you drive below 15 mph (25 km/h) when Lane Change Assist is ready to operate, the function’s status changes to standby.

  • When driving at low speeds, the vehicle will change to standby state if it is not recognized by the vehicles in the left and right adjacent lanes.

    Low speeds: 20–40 mph (30–60 km/h)

  • The Lane Change Assist status changes to standby if a risk of collision is detected.

  • The images or colors may display differently depending on the specifications of the instrument cluster or theme.

WARNING

When Highway Lane Change Assist turns OFF, Steering Assist is temporarily canceled. Always be cautious when driving.