Front seat adjustment for power seat (if equipped)
The driver's seat can be adjusted by using the control switches located on the outside of the seat cushion. Before driving, adjust the seat to the proper position so as to easily control the steering wheel, pedals and switches on the instrument panel.

The power seat is operable with the ignition OFF.
Therefore, children should never be left unattended in the car.

-
The power seat is driven by an electric motor. Stop operating once the adjustment is completed. Excessive operation may damage the electrical equipment.
-
When in operation, the power seat consumes a large amount of electrical power. To prevent unnecessary charging system drain, don't adjust the power seat longer than necessary whilst the engine is not running.
-
Do not operate two or more power seat control switches at the same time. Doing so may result in power seat motor or electrical component malfunction.
Moving forward and backward

To move the seat forward or backward:
-
Push the control switch forward or backward to move the seat to the desired position.
-
Release the switch once the seat reaches the desired position.
Reclining seatback

To recline the seatback:
-
Push the control switch forward or backward to move the seatback to the desired angle.
-
Release the switch once the seat reaches the desired position.
Changing seat cushion tilt and height

To change the height of the seat:
-
Pull the front portion of the control switch up to raise or press down to lower the front part of the seat cushion.
Pull the rear portion of the control switch up to raise or press down to lower the seat cushion.
-
Release the switch once the seat reaches the desired position.
Adjusting lumbar support (if equipped)


The lumbar support can be adjusted by pressing the lumbar support switch on the side of the seat.
Adjusting cushion extension for driver's seat (if equipped)

Front passenger seat control (if equipped)

The rear seat passenger may use the switches to control the front passenger seat.
-
To move the front passenger seat forward, press the switch (1). To move the front passenger seat backward, press the switch (2).
-
To recline the front passenger seat forward, press the switch (3). To recline the front passenger seat backward, press the switch (4).
Sliding forward or backward:
Angle adjustment: