Search by Title only
Home > Driving your vehicle > Safe Exit Warning (SEW) > System settings

System settings

Setting functions for the system

Safe Exit Assist

With the ENGINE START/STOP button in the ON position, select 'Driver Assistance → Blind-Spot Safety → Safe Exit Assist' from the Settings menu to turn on Safe Exit Warning and deselect to turn off the system.

Warning

If 'Safe Exit Assist' is deselected, the system cannot assist you.

Notice

If the engine is restarted, Safe Exit Warning will maintain the last setting.

Warning timing

With the ENGINE START/STOP button in the ON position, select 'Driver Assistance → Warning Timing' from the Settings menu to change the initial warning activation time for Blind-Spot Safety system.

When the vehicle is first delivered, warning timing is set to 'Normal'. If you change the warning timing, the warning time of other Driver Assistance systems may change.

Warning volume

With the ENGINE START/STOP button in the ON position, select 'Driver Assistance → Warning Volume' from the Settings menu to change the warning volume to 'High', 'Medium', 'Low' or 'Off' for Blind-Spot Safety system.

However, even if 'Off' is selected, the system's warning volume will not turn off but the volume will sound as 'Low'.

If you change the warning volume, the warning volume of other Driver Assistance systems may change. Set the warning volume after you learn it sufficiently.

Caution
  • The setting of the Warning Timing and Warning Volume applies to all functions of the Safe Exit Warning.

  • Even though 'Normal' is selected for warning timing, if the vehicles approaches at high speed from the rear, the initial warning activation time may seem late.

  • Select 'Late' for warning timing when traffic is light and when driving speed is slow.