Search by Title only
Home > Driving your vehicle > Intelligent Speed Limit Assist (ISLA) > System operation

System operation

System display and control

Intelligent Speed Limit Assist warns the driver and controls the vehicle with 'Show Speed Limit', 'Over Speed Warning', 'Change Set Speed'.

Notice
  • Warning and control is described based on '0' offset value. For more precautions related to the Speed Offset, refer to More Details.

Show Speed Limit

Speed limit information is displayed through the instrument cluster.

Notice
  • The Intelligent Speed Limit Assist displays the road speed limit and the additional sign information, and it could be displayed differently based on country and region.

  • The speed limit information and overtaking restriction with additional signs means the following sign should be conformed, and when the additional signs could not be detected, blank section is displayed through the instrument cluster.

Over Speed Warning

When the vehicle is faster than the speed limit, the red speed warning sign is indicated through the instrument cluster.

Change Set Speed

  • When the road speed limit is changed during Intelligent Speed Limit Assist or Smart Cruise Control is activated, the arrow pointing upwards or downwards appear through the instrument cluster to notify the Set Speed should be changed. Use 「+」/「-」 switch on the steering wheel to change the Set Speed to match the speed limit.

Warning
  • If the offset value is set greater than '0', the vehicle will drive above the road speed limit. In order to drive below the speed limit, set the offset value below '0' or use 「-」 switch on the steering wheel to slow the vehicle down.

  • The vehicle could be driven above the speed limit after the Set Speed is equal to the road speed limit. If necessary, the driver could control the brakes to slow down.

Warning

Change Set Speed function will not operate when the road speed limit is below 30 km/h (20 mph).

Intelligent Speed Limit Assist works using the speed unit in the instrument cluster set by the driver. If the speed unit is set to a unit other than the speed unit used in your country, Set Speed Auto Change function may not operate properly.

Notice
  • For more instructions related to the MSLA, refer to More Details.

  • For more instructions related to the SCC, refer to More Details.