Search by Title only
Home > Features of your vehicle > Driver Position Memory System > Driver position memory system reset

Driver position memory system reset

If the Driver position memory system does not work properly, initialize the system as follows.

How to initialize:

  1. Stop the vehicle and open the driver's door with the ignition switch or ENGINE START/STOP button in the ON position and the vehicle shifted to P (Park).

  2. Pull the driver's seat forward as far as possible and have the seatback upright as much as possible using the driver's seat forward/backward adjustment and seatback angle (recline) switches.

  3. Push the SET button and seat forward movement switch for 2 seconds simultaneously.

Initialization in the process:

  1. Initialization begins as the alarm sounds.

  2. The seat and seatback will automatically move backwards. The alarm sound will continue whilst the system is in operation.

  3. Initialization will be complete after the seat and seatback move to the centre with an alarm sound. If, however, cases as follows occur, the initialization process will come to a stop and the alarm sound will stop as well.

  • When pushing driving position memory system button

  • When pushing driver's seat height adjustment switch

  • When shifting from P (Park) to other positions

  • When driving speed exceeds 3 km/h

  • When the driver's door is closed