Search by Title only
Home > Driving your vehicle > Manual Speed Limit Assist (MSLA) > Setting speed limit:

Setting speed limit:

1
Press button and hold on the steering wheel, to turn the system on.

The speed limit indicator light will illuminate.

2
Move the + switch up or - switch down, and release it at the desired speed. Move the + switch up or - switch down and hold it. The speed will be increased or decreased by 10 km/h (5 mph).

Move the + switch up or - switch down and release it immediately. The speed will be increased or decreased by 1 km/h.

The set speed limit will be displayed on the instrument cluster.

The set speed limit will be displayed.

To drive over the preset speed limit you must depress hard on the accelerator pedal (more than approximately 80%) until the kick down mechanism works with a clicking noise. Then the set speed limit will blink and chime will sound until you return the vehicle speed within the speed limit.

Notice
  • Depressing the accelerator pedal less than approximately 50%, the vehicle will not speed over the preset speed limit but maintain the vehicle speed within the speed limit.

  • A clicking noise heard from the kick down mechanism by depressing the accelerator pedal fully is a normal condition.