Lighting control
To operate the lights, turn the knob at the end of the control lever to one of the following positions:
-
OFF position / DRL off position.
-
Auto light position
-
Position & Tail lamp
-
Headlight position
Position & Tail lamp 
When the light switch is in the position lamp position, the tail, license and instrument panel lights will turn ON.
Head light (Low Beam) 
When the light switch is in the head light position, head light (low beam), tail, license light will turn ON.
The ENGINE START/STOP button must be in the ON position to turn on the headlights.
Auto light
When the light switch is in the AUTO light position, the taillights and headlights will turn ON or OFF automatically depending on the amount of light outside the vehicle.
-
Never place anything over the sensor (1) located on the instrument panel as this will ensure better auto-light system control.
-
Don't clean the sensor using a window cleaner, the cleaner may leave a light film which could interfere with sensor operation.
-
If your vehicle has window tint or other types of metallic coating on the front windshield, the Auto light system may not work properly.