Search by Title only
Home > Driving your vehicle > Idle Stop and Go (ISG) system > ISG malfunction

ISG malfunction

The ISG may not operate when:

The ISG may not operate when an ISG related sensor or system error occurs.

The following will happen:

  • The yellow AUTO STOP () indicator on the instrument cluster will stay on after blinking for 5 seconds.

  • The light on the ISG OFF button will appear.

When the engine is in Idle Stop mode, it's possible to restart the engine without the driver taking any action. Before leaving the car or doing anything in the engine compartment, stop the engine by the ENGINE START/STOP button to the OFF position.

NOTICE

If the AGM battery is reconnected or replaced, ISG system will not operate immediately. If you want to use the ISG system, the battery sensor needs to be calibrated for approximately 4 hours with the ignition off. After calibration, turn the engine on and off 2 or 3 times.