Tail and stop lamp/Rear turn signal lamp/Side marker lamp (Bulb type) bulb replacement
Rear combination lamp - Type A
-
Tail and stop lamp/Side marker lamp
-
Rear turn signal lamp
-
Side marker lamp
To place the lamp bulb:
1
Open the liftgate.
2
Loosen the light assembly retaining screws with a cross-tip screwdriver.
3
Remove the rear combination light assembly from the body of the vehicle.
4
Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots
on the assembly.
5
Remove the bulb from the socket by pressing it in and rotating it counterclockwise until the tabs on the bulb align with the
slots in the socket.
6
Pull the bulb out of the socket.
7
Insert a new bulb by inserting it into the socket and rotating it until it locks into place.
8
Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly.
9
Push the socket into the assembly and turn the socket clockwise.
10
Reinstall the light assembly to the body of the vehicle.