Headlamp (High/Low)/Turn signal lamp/Position lamp/Daytime running lamp (Bulb type) bulb replacement - Headlamp Type A
-
Headlamp (low and high)
-
Turn signal lamp
-
Position lamp / daytime running lamp
To prepare replacing the lamp bulb:
1
Open the hood.
To replace the headlamp (low/high) bulb:
1
Remove the headlight bulb cover by turning it counterclockwise.
2
Disconnect the headlight bulb socket-connector.
3
Unsnap the headlight bulb retaining wire by depressing the end and pushing it upward.
4
Remove the bulb from the headlight assembly.
5
Install a new headlight bulb and snap the headlight bulb retaining wire into position by aligning the wire with the groove
on the bulb.
6
Connect the headlight bulb socket connector.
7
Install the headlight bulb cover by turning it clockwise.
To replace the turn signal lamp, position lamp, daytime running lamp bulb:
1
Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots
on the assembly.
2
Insert a new bulb by inserting it into the socket and rotating it until it locks into place.
3
Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly.
4
Push the socket into the assembly and turn the socket clockwise.