LCD Display Modes

The LCD display provides 5 modes. You can switch modes by pressing the Mode button.

* : if equipped

	Mode
	Driving Assist	Trip Computer	Turn By Turn (TBT)*	Information/Master Warning
Up/Down	Forward Collision-Avoidance Assist Lane Keeping Assist Blind-Spot Collision-Avoidance Assist Smart Cruise Control Lane Following Assist Highway Driving Assist*	Drive Info	Route Guidance	Driving force distribution/Energy flow (AWD)*
	Intelligent Speed Limit Assist	Since Refueling	Destination Info	TPMS
		Accumulated Info		The Master Warning mode displays warning messages related to the vehicle when one or more systems is not operating normally.
		AUTO STOP
		Speedometer

The information provided may differ depending on which functions are applicable to your vehicle.

NOTICE

Keep the engine running when configuring the display settings to prevent the battery from discharging.

Driving Assist mode

This mode displays the state of:

Forward Collision-Avoidance Assist

Lane Keeping Assist

Blind-Spot Collision-Avoidance Assist

Smart Cruise Control

Lane Following Assist

Highway Driving Assist*
Intelligent Speed Limit Assist

* For more details, refer to each system information in More Details.

Trip Computer mode

A: Drive info

Accumulated trip distance
Total driving time
Average fuel efficiency

The trip computer mode displays information related to vehicle driving parameters including fuel economy, tripmeter information and vehicle speed.

* For more details, refer to More Details.

Turn By Turn (TBT) mode

This mode displays the state of the navigation.

Information mode

Tire Pressure

A: Tire Pressure

Information related to Tire Pressure.

Refer to More Details.

Driving force distribution/Energy flow (AWD)

This mode informs the driver of their energy flow in various operating modes.
The distribution status of the driving power of the front and rear wheels are displayed when Auto 4WD mode is activated. For more details, refer to More Details.

Master warning mode

A: Check headlamp LED

This warning light informs the driver of the following situations.

Driver assistance system malfunction, limitation or radar/camera blockage
LED headlamp malfunction
Lamp malfunction
TPMS failure, low tire pressure, etc.

Information icon () will change to a Master Warning icon(). For Full LCD cluster (Type B), the same Master Warning icon () will appear under the Power gauge.

If the warning situation is resolved, the master warning light will be turned off and the Master Warning icon will disappear.