Search by Title only
Home > Features of your vehicle > Driver position memory system for power seat > Storing driver's seat positions

Storing driver's seat positions

  1. Place the ENGINE START/STOP button in the ON position while the vehicle is stopped.

  2. Adjust the driver's seat and outside rearview mirror to a comfortable position for the driver.

  3. Press SET button on the control panel. The system will beep once.

  4. Press one of the memory buttons (1 or 2) within 4 seconds after pressing the SET button. The system will beep twice when memory has been successfully stored.

When recalling an adjustment memory button while sitting in the vehicle, you can be surprised by the setting chosen if the memory has been adjusted by someone else. If that occurs, immediately push the seat position control switch in the direction of the desired position to stop further undesired movement.