If the driver position memory system reset fails to work, initialize the system as follows.

How to initialize:

Stop the car and open the driver's door with the ENGINE START/STOP button in ON and the automatic shift lever in P (parking) position.
Pull the driver's seat forward as far as possible and have the seatback upright as much as possible using driver's seat forward/backward adjustment and seatback angle (recline) movement switches.
Push SET button and seat forward movement switch button for 2 seconds simultaneously.

Initialization in the process:

Initialization begins as the alarm sounds.
The seat and seatback will automatically move backwards. The alarm sound will continue while the system is in operation.
Initialization will be all set after the seat and seatback move to the center with alarm sound being raised.

However, the initialization process will come to a stop and the alarm sound will stop as well.
- When pushing driving position memory system button
- When pushing driver's seat height adjustment switch
- When the driving speed exceeds 2 mph (3 km/h)
- When the driver's door is closed

NOTICE

When the operation of the driver's seat and alarm sound stop during the initialization process, start the process again.
Make sure that there are no obstacles around the driver's seat before starting initialization.
When the initialization is finished, adjust the seat to a position comfortable for the driver and save it to the driver position memory system.