With the mechanical key

1

Pull out the door handle.

2

Press the lever (1) located inside the bottom part of the cover with a key or flat-head screwdriver.

3

Push out the cover (2) while pressing the lever.

4

Turn the key (3) toward the rear of the vehicle to unlock and toward the front of the vehicle to lock.

Doors can also be locked and unlocked with the transmitter.
Once the doors are unlocked, they may be opened by pulling the door handle.
When closing the door, push the door by hand. Make sure the doors are closed securely.

NOTICE

In cold and wet climates, door lock and door mechanisms may not work properly due to freezing conditions.
If the door is locked/unlocked multiple times in rapid succession with either the vehicle key or door lock switch, the system may stop operating temporarily in order to protect the circuit and prevent damage to system components.

WARNING

Securely close your door before you begin driving. Failure to fully close your door may cause it to open during vehicle operation.
Keep your body out of the way of the closing door to prevent injuries.

WARNING

If any passengers must remain in the vehicle while it is very hot or cold outside, there is risk of injuries or danger to life. Do not lock the vehicle from the outside when there are passengers in the vehicle.

CAUTION

Do not unnecessarily open and close the door repeatedly or with excessive force. Such action can damage the vehicle door.

NOTICE

Always place the ENGINE START/STOP button in the OFF position, engage the parking brake, close all windows, and lock all doors when leaving your vehicle unattended.

To lock a door without the key, push the central door lock button (1) when the ENGINE START/STOP button is in the OFF position and close the door (2).
If you lock the door with the central door lock button (1), all vehicle doors will lock automatically.

NOTICE

Always remove the ignition key, engage the parking brake, close all windows, and lock all doors when leaving your vehicle unattended.