Regenerative braking (Paddle shifter)
The paddle shifter is used to adjust the regenerative braking level from 0 to 3 during decelerating or braking.
-
Left side (
): Increases regenerative braking and deceleration.
-
Right side (
): Decreases regenerative braking and deceleration.
Pull and hold the left side paddle shifter for more than 0.5 seconds and One Pedal Driving function is operated, increasing the regenerative braking. In this case, Stopping the vehicle is possible by pulling the paddle shifter.
* Refer to More Details.
Pull and hold the right-side paddle shifter for over 1 second to turn on and off the automatic change of the regenerative braking.
* Refer to More Details.
The paddle shifter does not operate when:
-
The (
) and () paddle shifters are pulled at the same time.
-
The vehicle is decelerating by depressing the brake pedal.
-
Cruise Control or Smart Cruise Control is operating.
-
The regenerative braking system is charged in 100%.
The selected regenerative braking level is displayed on the instrument cluster.
-
Initial setting of the regenerative braking level will be set before turning of the vehicle.
-
The setting will return to 1 when the vehicle is restarted from 0.
|
Drive mode |
Adjustable range |
|---|---|
|
SNOW |
0~1 |
|
ECO |
0~3 |
|
NORMAL |
0~3 |
|
SPORT |
0~3 |