i-Pedal
i-Pedal is controlled by the accelerator pedal. i-Pedal provides vehicle speed control (acceleration/deceleration, stopping) without manually controlling the paddle shifter.
To operate
-
The driver’s door is closed.
-
Pull the left side paddle shifter to level 3 regenerative braking system.
-
Pull the left side paddle shifter once again when the regenerative braking level is 3.
-
Check i-Pedal indicator symbol on the instrument cluster.
-
Automatic engagement of EPB
After the vehicle is stopped by the One Pedal Driving function, EPB is automatically engaged when any of these conditions occur:
-
The driver’s door is opened, and seat belt is not fastened
-
The hood is open.
-
The liftgate is open.
-
5 minutes have passed after the vehicle has stopped.
-
The system operation is limited due to other reasons.
-
Shifting to P (Park)
-
At the request of other systems.
Non-operating condition(s)
-
Smart Cruise Control is operating.
-
When the charging status of the high voltage battery is too high
-
The vehicle is in SNOW mode.
-
The trailer is attached
-
When the DBC function is operating
When the vehicle is stopped or parked by i-Pedal on a steep hills, be sure to depress the brake pedal.
When the deceleration rate, the vehicle’s level of deceleration, reaches a certain level while the i-Pedal function is on, brake lights may turn on without depressing the brake pedal.