Detecting Sensor
Rear view camera
The rear view camera acquires images for rear pedestrian detection. If the camera lens is covered with snow, rain, or a foreign substance, the system may not work properly. Always keep the camera lens clean.
Rear ultrasonic sensors
The rear ultrasonic sensors detect objects. The sensors are installed in the rear bumper. If the rear ultrasonic sensor(s) is covered with snow, rain, or a foreign substance, the system may not work properly. Always keep the rear bumper clean.
-
The system may turn off if interfered by electromagnetic waves.
-
Always keep the rear view camera and the ultrasonic sensors clean.
-
Do not use any cleanser containing acid or alkaline detergents when cleaning the rear view camera lens.Use only a mild soap or neutral detergent, and rinse thoroughly with water.
-
NEVER disassemble the rear view camera or the ultrasonic sensor components or apply any impact on the rear view camera or the ultrasonic sensor components.
-
Do not apply unnecessary force on the rear view camera or the ultrasonic sensors. The system may not operate properly if the rear view camera or the ultrasonic sensor(s) is forcibly moved out of proper alignment. Have the vehicle inspected by an authorized Kia dealer.
-
Do not spray the rear view camera or the ultrasonic sensors or their surrounding area directly with a high pressure washer. Shock applied from high pressure water may cause the device to malfunction.
-
The system may not work properly if the bumper has been damaged, or if the rear bumper has been replaced or repaired.
-
Do not apply foreign objects, such as a bumper sticker or a bumper guard, near the camera or sensors or apply paint to the bumper. Doing so may adversely affect the performance of the system.
Warning message
Rear camera error or blockage/ Parking sensor error or blockage
This warning message may appear when:
-
The rear view camera or the ultrasonic sensor(s) is blocked by dirt, snow, or a foreign object.
-
There is inclement weather, such as heavy snow, rain, etc.
If any of these conditions occur, the system may turn off automatically or not operate properly.
When the warning message is displayed in the cluster, make sure that the rear view camera and the rear ultrasonic sensors are clean.