Search by Title only
Home > Infotainment system > Bluetooth > Using a Bluetooth audio device

Using a Bluetooth audio device

You can listen to music stored in the connected Bluetooth audio device via your vehicle’s speakers.
1
On the control panel, press the [AUDIO] button.
2
When the mode selection window displays, turn the [TUNE] knob to select Bluetooth audio and then press the knob.

  1. Information about the song currently playing

Press the [MENU/CLOCK] button on the control panel to access the following a menu option.

  • Sound settings: You can change the settings related to sounds, such as location where sound will be concentrated and the output level for each range.

    • Position: Select a location where sound will be concentrated in the vehicle. Select Fade (Fader) or Balance, turn the [TUNE] knob to select the desired position, and then press the knob. To set sound to be centred in the vehicle, select Centre (Center).

    • Equaliser (Tone): Adjust the output level for each sound tone mode.

    • Speed dependent vol.: Set the volume to be adjusted automatically according to your driving speed.

      NOTICE

      • Depending on vehicle models or specifications, available options may vary.

      • Depending on the system or amplifier specifications applied to your vehicle, available options may vary.

  • Mode popup: Set to display mode selection window when the [AUDIO] button is pressed on the control panel.

  • Date/Time: You can change the date and time that are shown on the system display.

    • Set date: Set date to display on the system display.

    • Set time: Set time to display on the system display.

    • Time format: Select to display time in the 12 hour format or the 24 hour format.

    • Display (Power Off): Set to display the clock when the system power is off.

  • Language: You can change the display language.

Pausing/Resuming playback

To pause playback, press the [TUNE] knob on the control panel. To resume playback, press the [TUNE] knob again.

  • You can also press the Mute button on the steering wheel remote control.

Playing repeatedly

On the control panel, press the [1 RPT] button. The repeat play mode changes each time you press it. The corresponding mode icon will be displayed on the screen.

Playing in random order

On the control panel, press the [2 SHFL] button. The shuffle play mode is activated or deactivated each time you press it. When you activate the shuffle mode, the corresponding mode icon will be displayed on the screen.

NOTICE

  • Depending on the connected Bluetooth device, mobile phone, or the music player you are using, playback controls may differ.

  • Depending on the music player you are using, streaming may not be supported.

  • Depending on the connected Bluetooth device or mobile phone, some functions may not be supported.

  • If a Bluetooth enabled phone is being used to play music and it receives or makes a phone call, the music will stop.

  • Receiving an incoming call or making an outgoing call while playing Bluetooth audio may result in audio interference.

  • If you use the Bluetooth phone mode while using Bluetooth audio, playback may not automatically resume after you end the call depending on the connected mobile phone.

  • Moving the track up/down while playing Bluetooth audio mode may result in pop noises with some mobile phones.

  • The Rewinding/Fast forwarding function is not supported in the Bluetooth audio mode.

  • The playlist feature is not supported in the Bluetooth audio mode.

  • If the Bluetooth device is disconnected, Bluetooth audio mode will end.