Smart Cruise Control settings

To turn on Smart Cruise Control

Press the Driving Assist () button to turn on the function. The speed will be set to the current speed on the cluster.

If there is no vehicle in front of you, the set speed will be maintained.
If there is a vehicle in front of you, the speed may be adjusted to maintain the distance to the vehicle ahead. If the vehicle ahead accelerates, your vehicle will travel at a steady cruising speed after accelerating to the set speed.

NOTICE

If your vehicle speed is between 0~30 km/h (0~20 mph) when you press the Driving Assist () button, the set speed will be set to 30 km/h (20 mph).
If the driver changes to the lower gear, the driving speed may not reach the set speed.

To set vehicle distance

Each time the button is pressed, the vehicle distance changes as follows:

NOTICE

If you drive at 90 km/h (56 mph), the distance is maintained as follows:
- Distance 4 - approximately 52.5 m (172 ft.)
- Distance 3 - approximately 40 m (130 ft.)
- Distance 2 - approximately 32.5 m (106 ft.)
- Distance 1 - approximately 25 m (82 ft.)
The distance is set to the last set distance when the vehicle is restarted, or when Smart Cruise Control was temporarily canceled.

To increase set speed

Push the + switch up and release it immediately. The set speed will increase by 1 km/h (1 mph) each time the switch is operated in this manner.

Push the + switch up and hold it. The set speed will increase by 10 km/h (5 mph) each time the switch is operated in this manner.
You can increase the set speed to 180 km/h (110 mph).

WARNING

Check the driving condition before using the + switch. Driving speed may sharply increase when you push up and hold the + switch.

To decrease set speed

Push the - switch down and release it immediately. The set speed will decrease by 1 km/h (1 mph) each time the switch is operated in this manner.

Push the - switch down and hold it. The set speed will decrease by 10 km/h (5 mph) each time the switch is operated in this manner.
You can decrease the set speed to 30 km/h (20 mph).

To temporarily cancel Smart Cruise Control

Press the () switch or depress the brake pedal to temporarily cancel Smart Cruise Control.

To resume Smart Cruise Control

To resume Smart Cruise Control after the function was canceled, operate the +, - or () switch.

If you push the + switch up or - switch down, vehicle speed will be set to the current speed on the cluster.
If you push the () switch, vehicle speed will resume to the preset speed.

WARNING

Check the driving condition before using the () switch. Driving speed may sharply increase or decrease when you press the () switch.

To turn off Smart Cruise Control

Press the Driving Assist () button to turn Smart Cruise Control off.

NOTICE

If your vehicle is equipped with Manual Speed Limit Assist, press and hold the Driving Assist () button to turn off Smart Cruise Control. However Manual Speed Limit Assist will turn on.

Based on Driving Mode

Smart Cruise Control will change acceleration based on the drive mode selected from Drive Mode Integrated Control function. Refer to the following chart.

Drive Mode	Smart Cruise Control
SMART	Normal
ECO	Normal
SPORT	Fast

NOTICE

For more details on Drive Mode, refer to More Details.
Smart Cruise Control may not turn on or off in some of the drive modes for the operating conditions are not satisfied.
If your vehicle is not equipped with Drive Mode Integrated Control system, Smart Cruise Control accelerates your vehicle at a normal level.

Warning Methods

A: Driver Assistance

Warning Methods

The Warning Methods can be set with the vehicle on. Select User Settings → Driver Assistance → Warning Methods from the settings menu in the instrument cluster or Setup → Vehicle → Driver Assistance → Warning Methods from the settings menu in the infotainment system to change the following settings:

Warning Volume: Adjusts the volume of the warning sound. If you turn off the Warning Volume, for your safety, the function may warn you with a low volume.

Haptic Warning: Activate the steering wheel vibration warning. (if equipped)
Driving Safety Priority: Lowers all other audio volumes when the Driving Safety system sounds a warning.

NOTICE

If you change the Warning Methods, it can be applied to each function of the driver assistance system. Please check and change it in each function.
If the vehicle is restarted, Warning Methods will maintain the last setting.
The setting menu may not exist based on vehicle specification.
The Warning Volume and Haptic Warning cannot be turned off at the same time. When one of the warning is turned off the other is activated.