Search by Title only
Home > Features of your vehicle > LCD display > LCD display modes

LCD display modes

View

Description

Driving Assist view

Displays information related to Driver assistance system

Navigation view

Displays information related to navigation system

Utility information view

Displays information related to driving, warning, etc.

NOTICE

The Items displayed in the LCD display mode may differ depending on which functions are applicable to your vehicle.

Energy economy

  1. Average energy economy

  2. Instant energy economy

Average energy economy (1)

The average energy economy is calculated by the total driving distance and energy consumption since the last average energy economy was set.

  • On vehicle start: The information will automatically reset when the driver's door is opened after the vehicle is turned off, or approximately 3 minutes have passed after the vehicle is turned off.

  • After recharging: The information will reset to default automatically after recharging.

  • Manually: Press and hold the OK button on the steering wheel when the average energy consumption is displayed.

Instant energy economy (2)

Displays the instant energy economy during the last few seconds when the vehicle speed is more than approximately 10 km/h (6 mph).

Driving assist view

This mode displays the state of:

  • Lane Keeping Assist

    Blind-Spot Collision-Avoidance Assist

    Smart Cruise Control

    Lane Following Assist

    Highway Driving Assist

Navigation view

This mode displays the Navigation status.

Utility information view

Tire pressure

A: Low tire pressure

Current Driving Info

A: Current Trip

The driver's door is opened after turning off the vehicle or the vehicle is turned on after 3 minutes have passed, the Drive Info screen will reset.

After Charging

A: After Charging

The information after charging.

To manually reset the information, press and hold the OK button when viewing the After Charging.

Accumulated Info

A: Since Last Reset

The information is accumulated starting from the last reset.

To manually reset the information, press and hold the OK button when viewing the Since Last Reset.

NOTICE
  • The vehicle must be driven for a minimum of 300 meters (0.19 miles) since the last cycle before the accumulated driving information is recalculated.

  • The average energy economy is not displayed for more accurate calculation if the vehicle does not drive more than 10 seconds or 50 meters (0.03 miles) since the EV button is turned to ON.

Energy flow (4WD) (if equipped)

A: Drive Power Distribution

  • The electric vehicle system informs the drivers its energy flow in various operating modes.

  • The distribution status of the driving power of the front and rear wheels are displayed when Auto 4WD mode is activated. For more details, refer to More Details.

Master warning mode

This mode informs you of the following situations:

  • Driver assistance system malfunction, limitation or radar/camera blockage

  • LED headlamp malfunction

  • Lamp malfunction

  • TPMS failure, low tire pressure, etc.

A Master Warning icon ()will appear in the lower right corner on the LCD display. If the warning situation is resolved, the master warning light will be turned off and the Master Warning icon will disappear.

Other view modes

1: Service Interval

To reset the service interval, select SetupVehicleClusterService IntervalReset.

Driver Assistance settings (infotainment system)

Select SetupVehicleDriver Assistance on the infotainment system screen to set the Driver Assistance function.

  • Driver Assistance

    • SCC (Smart Cruise Control)

    • Driving Convenience

    • Speed Limit

    • Warning Method

    • DAW (Driver Attention Warning)

    • Driving Safety

    • Parking Safety

    NOTICE

    The infotainment system may change after software updates. For more information, refer to the manual provided in the infotainment system and the quick reference guide.