Operation

1. Shake the sealant bottle.

   

2. Remove the sealant bottle cap and sealant bottle holder cap and screw the bottle onto the sealant bottle holder.

   

3. Make sure the compressor valve on the filling hose is locked.

   

4. Unscrew the valve cap and screw the filling hose onto the tire valve.

   

5. Make sure the compressor is turned off.

6. Connect the power outlet connector.

   

7. Start the vehicle.

8. Turn the compressor on and let it run for approximately 5–7 minutes to fill the sealant up to the proper pressure.

9. Turn the compressor off.

10. Detach the filling hose from the tire valve.