Starting the vehicle
Power button

Operation
-
OFF
-
To completely turn off DRIVE READY or POWER ON, stop the vehicle, shift to P (Park), and press the EV button with the brake pedal pressed.
NOTICEWhen starting the vehicle while shifting to other than P:
The gear is automatically shifted from R (Rear)/D (Drive)/N (Neutral) to P (Park) and then the engine is turned off.
-
-
POWER ON
-
Press the EV button twice without depressing the brake pedal.
-
The warning lights can be checked.
-
In 14 minutes after POWER ON, the infotainment system screen shows the below. To continue to use the vehicle power, press ‘Start Utility Mode’
-
If POWER ON is maintained for 15 minutes without converting to the utility mode, the power is turned OFF.
NOTICE-
If the high-voltage battery charging and outdoor V2L features are used with POWER ON, the utility mode is operated and the power is not turned OFF.
-
The infotainment system can be changed through updates. For more information, refer to More Details
-
-
DRIVE READY
-
In OFF or POWER ON state, press the EV button while pressing the brake pedal in P (Park).
-
Starting the vehicle with smart key
The vehicle will check for the smart key when:
-
The vehicle doors are opened
-
The EV button is pressed
If the smart key is not in the vehicle, the indicator () and the message will appear on the instrument cluster.

-
Never press the EV button while the vehicle is in motion. This would result in loss of directional control and braking function, which could cause an accident.
-
Before leaving the driver's seat, always make sure the gear is shifted to P (Park) position, set the parking brake fully and shut the vehicle off. Unexpected and sudden vehicle movement may occur if these precautions are not taken.
-
Never reach for the EV button or any other controls through the steering wheel while the vehicle is in motion. The presence of your hand or arm in the area could cause loss of vehicle control, an accident and serious bodily injury or death.
-
Do not place any movable objects around the driver's seat as they may move while driving, interfere with the driver and lead to an accident.
-
The vehicle will start, only when the smart key is in the vehicle. Never allow children or any person who is unfamiliar with the vehicle touch the EV button or related parts. Pushing the EV button while the smart key is in the vehicle may result i More Detailsn unintended vehicle activation and/or unintended vehicle movement.

-
In an emergency situation while the vehicle is in motion, you are able to turn the vehicle off and to the POWER ON position by pressing the EV button for more than 2 seconds or 3 times repeatedly within 3 seconds. If the vehicle is still moving, to restart the vehicle:
-
Press the EV button when vehicle speed is over approximately 5 km/h (3 mph).
-
-
If the vehicle is turned off while the vehicle is in motion, do not attempt to move the gear to the P (Park) position. If the traffic and road conditions permit, you may put the gear in the N (Neutral) position while the vehicle is still moving and press the EV button in an attempt to restart the vehicle.
-
Do not press the EV button for more than 10 seconds except when the stop lamp fuse is blown.

-
If you leave the EV button in the ON position for a long time, the battery will discharge.
-
If you press the EV button without pressing the brake pedal, the vehicle will not start and the EV button changes as follows:
-
OFF → POWER ON → OFF
-
-
If the steering wheel doesn't unlock properly, the EV button will not work. Press the EV button while turning the steering wheel right and left to release the tension.
-
You are able to turn off the vehicle only when the vehicle is not in motion.
If you board the vehicle with smart key or digital key (UWB) (if equipped) while Target temperature is in operation, the vehicle will be switched to the DRIVE READY state for driving.But to switch to the DRIVE READY state without smart key and digital key, you need to place the NFC (card, digital key) (if equipped) on charging pad. And then close the door or step on the brake pedal. When you close the door or step on the brake pedal, if the smart key or digital key (if equipped) is not found in the vehicle, a related warning appears. After switching to the DRIVE READY state, please be careful as the vehicle may move if you shift the shift lever from the P (Park) position to another position.
-
If the battery is weak or the smart key does not work correctly, you can start the vehicle by pressing the EV button with the smart key. When you press the EV button directly with the smart key, the smart key should contact the button at a right angle.
-
When the stop lamp fuse is blown, you cannot start the vehicle normally.
Replace the fuse with a new one. If it is not possible, you can start the vehicle by pressing the EV button for 10 seconds while it is in the POWER ON position. The vehicle can start without pressing the brake pedal. But for your safety always press the brake pedal before starting the vehicle.