12V battery recharging
If the 12V battery discharges, start the vehicle for at least 60 minutes, either driving or idling. Alternatively, you may connect a fully automatic regulated charger to the engine compartment front jumper posts or to the 12V battery.
When recharging the 12V battery, take the following precautions:
-
Remove the 12V battery from the vehicle and place it in an area with good ventilation.
-
Do not allow cigarettes, sparks, or flame near the 12V battery.
-
Watch the 12V battery while it charges, and stop or reduce the charging rate in the following cases:
-
The 12V battery cells begin boiling violently.
-
The electrolyte temperature of any cell is above 120 °F (49 °C).
-
-
Wear eye protection when you check the 12V battery while it is charging.
-
Before performing maintenance or recharging the 12V battery, turn off all accessories and stop the vehicle.
-
Disconnect the 12V battery charger in the following order:
-
Turn off the 12V battery charger main switch.
-
Unhook the negative clamp from the negative battery terminal.
-
Unhook the positive clamp from the positive battery terminal.
-
-
The negative battery cable must be removed first and installed last when the 12V battery is disconnected.
AGM battery
-
Absorbent Glass Matt (AGM) batteries are maintenance-free. Have your AGM battery serviced by an authorized Kia dealer.
To charge your AGM battery, use only fully automatic battery chargers that are specially developed for AGM batteries.
-
When replacing the AGM battery, use replacement parts from an authorized Kia dealer.
-
Do not open or remove the cap on top of the battery. This may cause internal electrolytes to leak, which could result in severe injury.