A: Driver assistance

1. Blind-spot safety

2. Warning only

3. Off

With the engine on, select or deselect 'Driver Assistance → Blind Spot Safety' from the Settings menu to set whether or not to use each function.

• Warning Only: Blind-Spot Collision Warning will warn the driver with audible warning will be applied depending on the collision risk levels. Braking will not be assisted, so driver operate the vehicle directly.

• Off: Blind-Spot Collision Warning will turn off.

A: Blind-Spot Safety System is Off

If 'Blind-Spot Safety' function turn on (select except for 'Off' function), when the engine is restarted, the outside rearview mirror will blink for 3 seconds. It means the function is operated.

When the engine is restarted with Blind-Spot Collision Warning off, the 'Blind-Spot Safety System is Off' message will appear on the cluster.

A: Driver assistance

1. Warning timing

2. Normal

3. Late

With the engine on, select Driver Assistance → Warning Timing from the Settings menu to change the initial warning activation time for Blind-Spot Collision Warning.

To select the Warning time Normal or Late.

• Normal: Use under normal driving conditions. If it feels too sensitive, set the warning timing to Late.

A: Driver assistance

1. Warning volume

2. High

3. Medium

4. Low

5. Off (If steering wheel vibration function is equipped)

With the vehicle on, select Driver assistance → Warning volume from the Settings menu to change the Warning Volume to High, Medium, Low or Off for Blind-Spot Collision-Avoidance Warning.

However, when Warning Volume is turned Off, the steering wheel vibration function (if equipped) will turn on if it was turned Off.

If you change the Warning Volume, the warning volume of other Driver Assistance systems may change.