Search by Title only
Home > Driving your vehicle > Smart Cruise Control (SCC) > Smart Cruise Control settings

Smart Cruise Control settings

To turn on Smart Cruise Control

Press the Driving Assist () button to turn on the function. The speed will be set to the current speed on the cluster.

  • If there is no vehicle in front of you, the set speed will be maintained.

  • If there is a vehicle in front of you, the speed may be adjusted to maintain the distance to the vehicle ahead. If the vehicle ahead accelerates, your vehicle will travel at a steady cruising speed after accelerating to the set speed.

NOTICE

If your vehicle speed is between 0~30 km/h (0~20 mph) when you press the Driving Assist () button, the set speed will be set to 30 km/h (20 mph).

To set vehicle distance

Each time the button is pressed, the vehicle distance changes as follows:

NOTICE

  • If you drive at 90 km/h (56 mph), the distance is maintained as follows:

    • Distance 4 - approximately 52.5 m (172 ft.)

    • Distance 3 - approximately 40 m (130 ft.)

    • Distance 2 - approximately 32.5 m (106 ft.)

    • Distance 1 - approximately 25 m (82 ft.)

  • The distance is set to the last set distance when the vehicle is restarted, or when Smart Cruise Control was temporarily canceled.

To increase set speed

Push the + switch up and release it immediately. The set speed will increase by 1 km/h (1 mph) each time the switch is operated in this manner.

  • Push the + switch up and hold it. The set speed will increase by 10 km/h (5 mph) each time the switch is operated in this manner.

  • You can increase the set speed to 180 km/h (110 mph).

WARNING

Check the driving condition before using the + switch. Driving speed may sharply increase when you push up and hold the + switch.

To decrease set speed

Push the - switch down and release it immediately. The set speed will decrease by 1 km/h (1 mph) each time the switch is operated in this manner.

  • Push the - switch down and hold it. The set speed will decrease by 10 km/h (5 mph) each time the switch is operated in this manner.

  • You can decrease the set speed to 30 km/h (20 mph).

To temporarily cancel Smart Cruise Control

Press the () switch or depress the brake pedal to temporarily cancel Smart Cruise Control.

To resume Smart Cruise Control

To resume Smart Cruise Control after the function was canceled, operate the +, - or () switch.

  • If you push the + switch up or - switch down, vehicle speed will be set to the current speed on the cluster.

  • If you press the () switch, vehicle speed will resume to the preset speed.

WARNING

Check the driving condition before using the () switch. Driving speed may sharply increase or decrease when you press the () switch.

To turn off Smart Cruise Control

Press the Driving Assist () button to turn Smart Cruise Control off.

NOTICE

If your vehicle is equipped with Manual Speed Limit Assist, press and hold the Driving Assist () button to turn off Smart Cruise Control. However Manual Speed Limit Assist will turn on.

Based on Driving Mode

Smart Cruise Control will change acceleration based on the drive mode selected from Drive Mode Integrated Control function. Refer to the following chart.

Drive Mode

Smart Cruise Control

SMART

Normal

ECO

Slow

SPORT

Fast

NORMAL

Normal
NOTICE

  • For more details on Drive Mode, refer to More Details.

  • Smart Cruise Control may not turn on or off in some of the drive modes for the operating conditions are not satisfied.

  • If your vehicle is not equipped with Drive Mode Integrated Control system, Smart Cruise Control accelerates your vehicle at a normal level.

Warning volume

A: Driver assistance

  1. Warning volume

  2. High

  3. Medium

  4. Low

  5. Off (If steering wheel vibration function is equipped)

With the vehicle on, select Driver assistance → Warning volume from the Settings menu to change the Warning Volume High, Medium, Low or Off for Smart Cruise Control.

However, even if Off is selected, the Warning Volume of Smart Cruise Control will not turn off but the volume will sound as Low.

If you change the Warning Volume, the warning volume of other Driver Assistance systems may change.

NOTICE

  • If the vehicle is restarted, Warning Volume will maintain the last setting.

  • Depending on your region or update, the menu may be displayed as 'Warning volume', 'Warning Sound and Haptic' or 'Warning Methods'.