Controlling windows switch
-
Type A: 1
-
Type B (if equipped): 1, 2
Operation
-
Press or pull the switch to the first (1)/second (2) detent position.
Only type B can use auto up/down function (2).
Operating condition(s)
-
The vehicle is in the ON position
Do not install any accessories in the area of windows. It may impact jam protection.
-
While driving with the rear windows down, your vehicle may demonstrate a wind buffeting or pulsation noise. This noise is a normal occurrence and can be reduced or eliminated by taking the following actions. If the noise occurs with one or both of the rear windows down, partially lower both front windows approximately one inch.
-
In cold and wet climates, power windows may not work properly due to freezing conditions.