Manual Speed Limit Assist (MSLA) (if equipped)
You can set the speed limit when you do not want to drive over a specific speed.
If you drive over the preset speed limit, the warning function operates (set speed limit will blink and chime will sound) until the vehicle speed returns within the speed limit.
While Manual Speed Limit Assist is in operation, Cruise Control cannot be activated.
To set speed limit:
-
Press the Driving Assist button twice on the steering wheel, to turn the function on.
The speed limit indicator light will appear.
-
Push the switch down (to SET-).
-
Push the switch up (to RES+) or down (to SET-), and release it at the desired speed. Push the switch up (to RES+) or down (to SET-) and hold it. The speed will increase or decrease by 5 km/h (3 mph).
Push the switch up (to RES+) or down (SET-) and release it immediately.
The speed will increase or decrease by 1 km/h. The set speed limit will display on the instrument cluster.
The set speed limit will be displayed. To drive over the preset speed limit you must depress hard on the accelerator pedal (more than approximately 80%) until the kickdown mechanism (if equipped) works with a clicking noise. Then the set speed limit will blink and chime will sound until you return the vehicle speed within the speed limit.
-
Depressing the accelerator pedal less than approximately 50%, the vehicle will not speed over the preset speed limit but maintain the vehicle speed within the speed limit.
-
A clicking noise heard from the kick down mechanism by depressing the accelerator pedal fully is a normal condition.
Temporarily pausing Manual Speed Limit Assist
Press the (
) switch to temporarily pause the set speed limit. The set speed limit will turn off but the Speed Limit (
) indicator will stay on.
Resuming Manual Speed Limit Assist
To resume Manual Speed Limit Assist after the function was paused, operate the (+), (-), () switch.
If you push the (+) switch up or (–) switch down, vehicle speed will be set to the current speed on the cluster.
If you press the () switch, vehicle speed will resume to the preset speed.
To turn off Manual Speed Limit Assist, do one of the following:
-
Press the Driving Assist button.
-
Turn the vehicle off.
If you press the CANCEL (O) button once, the set speed limit will cancel, but it will not turn the function off. If you wish to reset the speed limit, push the switch up (to RES+) or down (to SET-) to the desired speed.
The "---" indicator will blink if there is a problem with Manual Speed Limit Assist.
In this case, have the function checked by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.