• The driver can activate the function by placing the vehicle to the ON position and by selecting User settings → Driver assistance → Rear Cross-Traffic Collision Warning. Rear Cross-Traffic Collision Warning will turn on and get activated.

• When the vehicle is turned off then on again, the functions always get ready to be activated.

• When the function is initially turned on and when the vehicle is turned off then on again, the warning light will appear for 3 seconds on the outside rear view mirror.

The function will activate when vehicle speed is below 10 km/h and with the shift lever in R (Reverse).

• The function will not activate when the vehicle speed exceeds 10 km/h (6 mph). The function will activate again when the speed is below 8 km/h (5 mph).

The function's detecting range is approximately 0.5~20 m (1.6~60 ft.), An approaching vehicle will be detected if their vehicle speed is within 8~36 km/h (5~20 mph).

Note that the detecting range may vary under certain conditions. As always, use caution and pay close attention to your surroundings when backing up your vehicle.