Search by Title only
Home > Driving your vehicle > Blind-Spot Collision Warning (BCW) > Blind-Spot Collision Warning settings

Blind-Spot Collision Warning settings

Blind-Spot Safety

With the engine on, select or deselect 'Driver Assistance → Blind-Spot Safety' from the Settings menu to set whether or not to use each function.

  • Warning Only: Blind-Spot Collision Warning will warn the driver with audible warning will be applied depending on the collision risk levels. Braking will not be assisted, so driver operate the vehicle directly.

  • Off: Blind-Spot Collision Warning will turn off.

If 'Blind-Spot Safety' function turn on (select except for 'Off' function), when the engine is restarted with Blind-Spot Collision Warning off, the outside rearview mirror will blink for 3 seconds. It means the function is operated.

When the engine is restarted with Blind-Spot Collision Warning off, the 'Blind-Spot Safety System is Off' message will appear on the cluster.

Warning Timing

With the engine on, select 'Driver Assistance → Warning Timing' from the Settings menu to change the initial warning activation time for Blind-Spot Collision Warning.

To select the Warning time 'Normal' or 'Late'.

  • Normal: Use under normal driving conditions. If it feels too sensitive, set the warning timing to 'Late'.

  • Late: The warning message is notified more slowly.

NOTICE

If you change the Warning Timing, the warning time of other Driver Assistance systems may change.

Warning Volume

With the engine on, select 'Driver Assistance → Warning Volume from the Settings menu to change the Warning Volume to 'High', 'Medium' or 'Low' for Blind-Spot Collision Warning.

If you change the Warning Volume, the warning volume of other Driver Assistance systems may change.

CAUTION

  • The setting of the Warning Timing and Warning Volume applies to all functions of Blind-Spot Collision Warning.

  • Even though 'Normal' is selected for Warning Timing, if the front vehicle suddenly stops, the initial warning activation time may seem late.

  • Select 'Late' for Warning Timing when traffic is light and when driving speed is slow.

NOTICE

  • If the engine is restarted, Warning Timing and Warning Volume will maintain the last setting.

  • If you change the Warning Volume, the Warning Volume of other Driver Assistance systems may change.