Press the Driving Assist button to turn on the function. The speed will be set to the current speed on the cluster.

• If there is no vehicle in front of you, the set speed will be maintained.

• If there is a vehicle in front of you, the speed may be adjusted to maintain the distance to the vehicle ahead. If the vehicle ahead accelerates, your vehicle will travel at a steady cruising speed after accelerating to the set speed.

NOTICE

• If your vehicle speed is between 0~30 km/h (0~20 mph) when you press the Driving Assist button, the Smart Cruise Control speed will be set to 30 km/h (20 mph).

• The Driving Assist button symbol may vary depending on your vehicle option.

Each time the button is pressed, the vehicle distance changes as follows:

If you drive at 90 km/h (56 mph), the distance is maintained as follows:

• Distance 4 - approximately 52.5 m (172 ft.)

• Distance 3 - approximately 40 m (130 ft.)

• Distance 2 - approximately 32.5 m (106 ft.)

• Distance 1 - approximately 25 m (82 ft.)

NOTICE

The distance is set to the last set distance when the engine is restarted, or when Smart Cruise Control was temporarily canceled.

Push the + switch up and release it immediately. The set speed will increase by 1 km/h (1 mph) each time the switch is operated in this manner.

• Push the + switch up and hold it. The set speed will increase by 10 km/h (5 mph) each time the switch is operated in this manner.

• You can increase the set speed to 180 km/h (112 mph).

WARNING

Check the driving condition before using the + switch. Driving speed may sharply increase when you push up and hold the + switch.

Push the - switch down and release it immediately. The set speed will decrease by 1 km/h (1 mph) each time the switch is operated in this manner.

• Push the - switch down and hold it. The set speed will decrease by 10 km/h (5 mph) each time the switch is operated in this manner.

• You can decrease the set speed to 30 km/h (20 mph).

Press the () switch or depress the brake pedal to temporarily cancel Smart Cruise Control.

To resume Smart Cruise Control after the function was canceled, push the +, - or () switch.

• If you press the + switch up or - switch down, vehicle speed will be set to the current speed on the cluster. If you push the () switch, vehicle speed will resume to the preset speed.

WARNING

Driving speed may sharply increase or decrease when you press the () switch. It may cause a dangerous situation. Check the set speed before using the () switch.

Press the Driving Assist button to turn Smart Cruise Control off.

Smart Cruise Control will change acceleration based on the drive mode selected from Drive Mode Integrated Control function. Refer to the following chart.

NOTICE

For more details on Drive Mode, refer to More Details.

With the engine on, select 'Driver Assistance → Warning Volume from the Settings menu to change the Warning Volume to 'High', 'Medium' or 'Low' for Smart Cruise Control.

If you change the Warning Volume, the warning volume of other Driver Assistance systems may change.

NOTICE

If the engine is restarted, Warning Volume will maintain the last setting.