System setting and operating conditions
System setting
With the engine ON, the Leading Vehicle Departure Alert system turns on and gets ready to be activated when the 'User Settings Driver Assistance Driving Assist Leading vehicle departure alert' is selected on the cluster. The system stops operation when the setting is deactivated. However, if the engine is turned off then on again, the system maintains the previous state.
Operating conditions
While the Smart Cruise Control (SCC) system is in operation, your vehicle stops behind the vehicle in front when it stops. The message is displayed on the cluster within 3 seconds after the stop and the system will be in the standby position.
stem activation
If the driver does not take action for a certain period of time after the vehicle in front departs, the message is displayed on the cluster.
The vehicle departs automatically if the accelerator pedal is depressed or [RES +] or [SET -] switch is activated when there is a vehicle in front.
The Smart Cruise Control (SCC) system is deactivated if the accelerator pedal is depressed or [RES +] or [SET -] switch is activated when there is no vehicle in front.
Always check the front of the vehicle and road conditions before departure.