• Do not apply license plate molding or foreign objects such as a bumper sticker or a bumper guard near the radar sensor. Doing so may adversely affect the sensing performance of the radar.

• Always keep the radar sensor and cover clean and free of dirt and debris.

• Use only a soft cloth to wash the vehicle. Do not spray pressurized water directly on the sensor or sensor cover.

• Be careful not to apply unnecessary force on the radar sensor or sensor cover. If the sensor is forcibly moved out of proper alignment, the FCA system may not operate correctly. In this case, a warning message may not be displayed. Have the vehicle inspected by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.

• If the front bumper becomes damaged in the area around the radar sensor, the FCA system may not operate properly. Have the vehicle inspected by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.

• Use only genuine parts to repair or replace a damaged sensor or sensor cover. Do not apply paint to the sensor cover.

• NEVER install any accessories or stickers on the front windshield, nor tint the front windshield.

• NEVER place any reflective objects (i.e. white paper, mirror) over the dashboard. Any light reflection may cause a malfunction of the system.

• Pay special attention to keep the camera out of water.

• NEVER disassemble the camera assembly, nor impact the camera assembly.

• Playing the vehicle audio system at high volume may prevent you from hearing the system warning sounds.

Have the vehicle inspected by a professional workshop.

Kia recommends to visit an authorized Kia dealer/service partner when:

• The windshield glass is replaced.

• The radar sensor or cover gets damaged or replaced.