Parking brake - Foot type (if equipped)
Applying the parking brake

To engage the parking brake, first apply the foot brake and then press the parking brake pedal down as far as possible.
In addition it is recommended that when parking the vehicle on an incline, the shift lever should be in the P (Park) position on automatic transmission vehicles.

-
Driving with the parking brake applied will cause excessive brake pad (or lining) and brake rotor wear.
-
Do not operate the parking brake while the vehicle is moving except in an emergency situation. It could damage the vehicle system and make endanger driving safety.
Releasing the parking brake

To release the parking brake, press the parking brake pedal a second time while applying the foot brake. The pedal will automatically extend to the fully released position.
If the parking brake does not release or does not release all the way, have the system checked by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.

-
To prevent unintentional movement when stopped and leaving the vehicle, do not use the shift lever instead of the parking brake. Set the parking brake AND make sure the shift lever is securely positioned in P (Park) for automatic transmission equipped vehicles.
-
Never allow anyone who is unfamiliar with the vehicle to touch the parking brake. If the parking brake is released unintentionally, serious injury may occur.
-
All vehicles should always have the parking brake fully engaged when parking to avoid inadvertent movement of the vehicle which can injure occupants or pedestrians.

Check the brake warning light by turning the ENGINE START/STOP button ON (do not start the engine). This light will be illuminated when the parking brake is applied with the ENGINE START/STOP button in the START or ON position.
Before driving, be sure the parking brake is fully released and the brake warning light is off.
If the brake warning light remains on after the parking brake is released while the engine is running, there may be a malfunction in the brake system. Immediate attention is necessary.
If at all possible, cease driving the vehicle immediately. If that is not possible, use extreme caution while operating the vehicle and only continue to drive the vehicle until you can reach a safe location or repair shop.