Driver position memory system for power seat (if equipped)

A driver position memory system is provided to store and recall the driver seat and outside rearview mirror position with a simple button operation.

By saving the desired position into the system memory, different drivers can reposition the driver seat based upon their driving preference. If the battery is disconnected, the desired seat position memory will need to be re-saved.

WARNING

Driver Position Memory System

Never attempt to operate the driver position memory system while the vehicle is moving.

This could result in the loss of control, and an accident causing death or serious injury.

Storing driver's seat positions

1

Turn the shifter dial into P while the POWER button is ON.

2

Adjust the driver's seat and outside rearview mirror comfortable for the driver.

3

Press SET button on the control panel. The system will beep once.

4

Press one of the memory buttons (1 or 2) within 4 seconds after pressing the SET button. The system will beep twice when memory has been successfully stored.

When recalling an adjustment memory button while sitting in the vehicle, you can be surprised by the setting chosen if the memory has been adjusted by someone else. If that occurs, immediately push the seat position control switch in the direction of the desired position to stop further undesired movement.

Recalling positions from memory

1

shifter dial into the P.

2

To recall the position in the memory, press the desired memory button (1 or 2). The system will beep once, then the driver's seat will automatically adjust to the stored position.

Adjusting the control switch for the driver's seat while the system is recalling the stored position will cause the movement to stop and move in the direction that the control switch is moved.

Easy access function (if equipped)

The system will move the driver's seat automatically as follows:

With smart key system
- It will move the driver's seat rearward when POWER button is changed to the OFF position.
- It will move the driver's seat forward when the POWER button is changed to the ACC or ON position.
- It will move the driver's seat forward when you get in your vehicle with the smart key after closing the driver's door.

You can activate or deactivate this feature. Refer to More Details.