Search by Title only
Home > Driving your vehicle > Power button

Power button

Whenever the front door is opened, the POWER button will illuminate for your convenience.

The light will go off after about 30 seconds when the door is closed.

When all entrances are closed, if you lock the vehicle by using the transmitter or the smart key, the light will go off immediately.

POWER button position

The POWER button has the following four positions.

  • OFF

  • ACC (Accessory)

  • ON

  • START/RUN

OFF (Not Illuminated)

To turn off the vehicle power (ON position), press the POWER button with the shifter dial in the P (Park) position. When you press the POWER button without the shifter dial in the P (Park) position, the POWER button will not change to the OFF position but to the ACC position.

ACC (Accessory) (Amber)

Press the POWER button while it is in the OFF position without depressing the brake pedal.

If the POWER button is in the ACC position for more than 1 hour, the button is turned off automatically to prevent battery discharge.

ON (Red)

Press the POWER button while it is in the ACC position without depressing the brake pedal.

The warning lights can be checked before the vehicle is started. Do not leave the POWER button in the ON position for a long time. The battery may discharge, because the vehicle is not ON.

START/RUN (Not Illuminated)

To start the vehicle, depress the brake pedal and press the POWER button with the shifter dial in the P (Park) position. For your safety, start the vehicle with the shifter dial in the P (Park) position.

If you press the POWER button without depressing the brake pedal, the vehicle will not start and the POWER button changes as follow:

Go to OFF → ACC → ON → OFF or ACC

NOTICE

If you leave the POWER button in the ACC or ON position for a long time, the battery will discharge.

WARNING

Starting vehicle

Never press the POWER button while the vehicle is in motion except in an emergency. This would result in loss of directional control and braking function, which could cause an accident.

WARNING

Leaving the vehicle

To avoid unexpected or sudden vehicle movement, never leave your vehicle if the reduction gear is not locked in the P (Park) position and the parking brake is fully engaged. Before leaving the driver's seat, always make sure the reduction gear is engaged in P (Park), set the parking brake fully and shut the vehicle off.

Contains Topics
Starting the vehicle
Turning Off the Vehicle