Warning and function control
Rear Cross-Traffic Collision Warning
If the vehicle detected by the sensors approaches from the rear left/right side of your vehicle, the warning chime will sound, the warning light on the outside rear view mirror will blink and a message will appear on the LCD display. If Rear View Monitor is in activation, a message will also appear on the infotainment function screen.
The warning will stop when:
-
The detected vehicle moves out of the sensing area or
-
when the vehicle is right behind your vehicle or
-
when the vehicle is not approaching your vehicle or
-
when the other vehicle slows down.
-
The vehicle's approaching speed is decreased.
-
When the operation condition of Rear Cross-Traffic Collision Warning is satisfied, the warning will occur every time a vehicle approaches the side or rear of your stopped (0 km/h vehicle speed) vehicle.
-
The function's warning may not operate properly if the left or right of your vehicle's rear bumper is blocked by a vehicle or obstacle.
-
The driver should always use extreme caution while operating the vehicle, whether or not the warning light on the outside rear view mirror illuminates or there is a warning alarm.
-
Playing the vehicle audio function at high volume may offset the function's warning sounds.
-
The warning of Rear Cross-Traffic Collision Warning may not sound while other function's warning sounds.
-
If any other warning sound such as seat belt warning chime is already generated, Rear Cross-Traffic Collision Warning warning may not sound.
-
Drive safely even though the vehicle is equipped with Rear Cross-Traffic Collision Warning. Do not solely rely on the function but check your surrounding when backing the vehicle up.
-
The driver is responsible for accurate brake control.
-
Always pay extreme caution while driving. Rear Cross-Traffic Collision Warning may not operate properly or unnecessarily operate in accordance with your driving situations.