Search by Title only
Home > Features of your vehicle > Steering wheel > Horn

Horn

Operating the horn

Operation

  • Press the area around the horn symbol on your steering wheel.

WARNING

  • Never adjust the angle and height of the steering wheel whilst driving. You may lose steering control and cause severe personal injury, death or accidents.

  • After adjusting, push the steering wheel both up and down to be certain it is locked in position.

  • If the steering wheel becomes too warm, turn the system off. The heated steering wheel may cause burns even at low temperatures, especially if used for a long time.

CAUTION

  • Do not install any type of grip cover for the steering wheel, it may impair the function of the heated steering wheel system.

  • When cleaning the heated steering wheel, do not use an organic solvent such as paint thinner, benzene, alcohol and petrol. Doing so may damage the surface of the steering wheel.

  • If the surface of the steering wheel is damaged by a sharp object, damage to the heated steering wheel components could occur.

  • Do not strike the horn severely to operate it, or hit it with your fist. Do not press on the horn with a sharp-pointed object.

  • When cleaning the steering wheel, do not use an organic solvent such as thinner, benzene, alcohol and petrol. Doing so may damage the steering wheel.

NOTICE

  • Be sure to adjust the steering wheel to the desired position before driving.

  • After adjustment, sometimes the lock-release lever may not lock the steering wheel. It is not a malfunction. This occurs when two gears engage. In this case, adjust the steering wheel again and then lock the steering wheel.

  • The following symptoms may occur during normal vehicle operation:

    • The EPS warning light does not appear.

    • The steering effort is high immediately after pressing the EV button to ON position. This happens as the EPS system performs the diagnostics. When the diagnostics are complete, the steering effort will return to its normal condition.

    • A click noise may be heard from the EPS relay when you are turning on or off the EV button.

    • Motor noise may be heard when the vehicle is at a stop or at a low driving speed.

    • When the abnormality is detected in the electric power steering system, a deadly accident prevention purposes, steering assist functions will be stopped. At this time, the instrument cluster warning light turns on or blinks and the power to manipulate the steering will be off. Please check immediately after moving the vehicle to a safe zone.

    • The steering effort increases if the steering wheel is rotated continuously when the vehicle is not in motion. However, after a few minutes, it will return to its normal conditions.

    • If the Electric Power Steering System does not operate normally, the warning light will appear or blink on the instrument cluster. The steering wheel may become difficult to control or operate abnormally. In this case, have the system inspected by a professional workshop. Kia recommends that you visit an authorised Kia dealer/service partner.

    • When you operate the steering wheel in low temperature, abnormal noise could occur. If temperature rises, the noise will disappear. This is a normal condition.

    • When jump-starting the vehicle after battery discharge, the steering wheel may not function properly. It is a temporary situation due to low battery voltage, and upon stable battery charging, the steering wheel will function normally again. Please move the steering wheel around to make sure the steering wheel is functioning properly before driving the vehicle.

  • The heated steering wheel will turn off automatically approximately 30 minutes after the heated steering wheel is turned on.

  • When the charging system warning light comes on due to the low voltage (when the alternator or battery does not operate normally or malfunctions), the steering wheel may require increased steering effort.

  • The steering effort can suddenly increase, if the operation of the EPS system is stopped to prevent serious accident when EPS control unit detects malfunction of the EPS system by self-diagnosis.