Navigation-based Smart Cruise Control operation
Operating conditions
Navigation-based Smart Cruise Control is ready to operate if all the following conditions are satisfied:
-
Smart Cruise Control is operating
-
Driving on main roads of highways (or motorways)
For more details on how to operate Smart Cruise Control, refer to More Details.
Navigation-based Smart Cruise Control display and control
When Navigation-based Smart Cruise Control operates, it will be displayed on the cluster as follows:
Standby
If all the operating conditions are satisfied, the white (
) indicator will appear.
Operating
During speed control, the green () indicator will illuminate.
Pause/Driver operation
If Smart Cruise Control cannot be operated due to pause or rerouting, the grey () indicator will appear on the cluster.
If the accelerator pedal is depressed, the white () indicator will blink on the cluster.
The warning message will appear in the following circumstances:
A: Drive carefully
-
Navigation-based Smart Cruise Control is not able to slow down your vehicle to a safe speed
The images and colours in the instrument cluster may differ depending on the cluster type or theme selected from the settings menu.
Highway Curve Zone Auto Slowdown
Depending on the curve ahead on the highway (or motorway), the vehicle will decelerate, and after passing the curve, the vehicle will accelerate to Smart Cruise Control set speed.
The starting point of deceleration depends on the vehicle's driving speed and the curvature of the road. The higher the driving speed, the earlier the deceleration start point.