Search by Title only
Home > Driver assistance system > Safe Exit Warning (SEW) > Safe Exit Warning operation

Safe Exit Warning operation

Warning and control

Safe Exit Warning warns the following actions.

  • Collision warning when exiting vehicle

Collision warning when exiting vehicle

A: Watch for traffic

The warning light on the side view mirror will blink and the warning message will appear on the cluster, and an audible warning will sound.

  • Safe Exit Warning will warn under the following circumstances:

    • Your driving speed: below 3 km/h (2 mph)

    • The speed of the approaching vehicle from the rear: above 6 km/h (4 mph)

WARNING
  • For your safety, change the Settings after parking the vehicle at a safe location.

  • If any other function's warning message is displayed or audible warning is generated, Safe Exit Warning message may not be displayed and audible warning may not be generated.

  • You may not hear the warning sound of Safe Exit Warning if the surrounding is noisy.

  • Adjust the volume in the vehicle properly and always pay attention.

  • Safe Exit Warning does not operate in all situations or cannot prevent all collisions.

  • Safe Exit Warning may warn the driver late or may not warn the driver depending on the vehicle and driving conditions. Always check vehicle surroundings.

  • The driver and passengers are responsible for accidents that occur whilst exiting the vehicle. Always check the surroundings before you exit the vehicle.

NOTICE
  • After the vehicle is turned off, Safe Exit Warning operates for approximately 3 minutes, but turns off immediately if the doors are locked.

  • Images or colours may be displayed differently depending on the instrument cluster specifications or theme.