Search by Title only
Home > Features of your vehicle > Lighting > Lighting controls

Lighting controls

Operating lights

Type A
Type B
Type C

Operation

  1. OFF (O)

  2. AUTO

    • The headlamps and tail lights will turn ON or OFF automatically depending on the external ambient light level.

  3. Position and tail light ()

  4. Low beam ()

NOTICE

The vehicle must be in the ON position to turn on the headlights.

CAUTION

  • Never place anything over the sensor located on the instrument cluster as this will ensure better auto-light system control.

  • Don't clean the sensor using a window cleaner, the cleaner may leave a light film which could interfere with sensor operation.

  • If your vehicle has window tint or other types of metallic coating on the front windscreen, the Auto light system may not work properly.

Operating the turn signals

Type A
Type B
Type C

Operation

  • Move the lever up or down (A).

NOTICE

If an indicator flash is abnormally quick or slow, a bulb may be burned out or have a poor electrical connection in the circuit.

One-Touch Lane-Change function

Operation

  • Move the turn signal lever up or down (B).

  • Release the lever.

NOTICE

  • You can activate or deactivate the One Touch Turn Signal function or choose the number of blinking (3, 5, or 7) by selecting "Lights → One Touch Turn signal" from the Settings menu.

  • The infotainment system may change after software updates. For more information, refer to the manual provided in the infotainment system and the quick reference guide.

  • If an indicator stays on and does not flash or if it flashes abnormally, one of the turn signal bulbs may be burned out and will require replacement.

Operating the fog lights (if equipped)

Type A
Type B
Type C

Operation

  • Turn the fog light switch (1) to the dedicated position.

  • Front: ()

  • Rear: ()

Operating condition(s)

  • The headlamps are turned ON.

CAUTION

When in operation, the fog lights consume large amounts of vehicle electrical power. Only use the fog lights when visibility is poor.

Operating the high-beam headlamps

Type A
Type B
Type C

Operation

  • Push the lever to use high beam.

  • Pull the lever towards you to flash the headlights ().

WARNING

Do not use high beam when there are other vehicles. Using high beam could obstruct the other driver's vision.

NOTICE

  • If you push the lever away from you, the lever will return to its original position. The high beam indicator will light when the high beam headlights are switched on.

  • It will return to the normal (low beam) position when released after pulling the lever towards you. The headlight switch does not need to be on to use this flashing feature.