Search by Title only
Home > Driver assistance system > Blind-Spot Collision-Avoidance Assist (BCA) > Blind-Spot Collision-Avoidance Assist operation

Blind-Spot Collision-Avoidance Assist operation

Blind-Spot Collision-Avoidance Assist will warn and control as following operation.

  • Collision warning

  • Collision-avoidance assist (whilst departing)

Collision warning (whilst driving)

First warning (Left/Right)

The warning light on the cluster, outside rearview mirror (side view mirror) and head-up display (if equipped) will appear when the vehicle on both lanes is detected from the rear.

A vehicle is detected in the following conditions.

  • Your driving speed: Above 20 km/h (12 mph)

  • The speed of the vehicle in your blind spot area: Above 10 km/h (7 mph)

With the vehicle detection state, Collision warning will alert the driver when the turn signal is activated to make a lane change with an adjacent car in the blind spot area.

  • Collision warning will alert the driver with the warning light on the cluster, outside rearview mirrors (side view mirrors), head-up display (if equipped) and an audible sound and steering wheel vibration.

WARNING
  • The detecting range of the front corner radar or rear corner radar is determined by a normal road width, therefore, on a narrow road, Blind-Spot Collision-Avoidance Assist may detect other vehicles two lanes over and warn you. In contrast, on a wide road, Blind-Spot Collision-Avoidance Assist may not be able to detect a vehicle driving in the next lane and may not warn you.

  • When the hazard warning flasher is on, the collision warning by the turn signal will not operate.

NOTICE
  • If the driver's seat is on the left side, the collision warning may occur when you turn left. If the driver's seat is on the right side, the collision warning may occur when you turn right.

    Maintain a proper distance with the vehicles in the lane.

  • Images or colours may be displayed differently depending on the instrument cluster specifications or theme.

Collision-Avoidance Assist (whilst departing)

A: Emergency Braking

The warning light on the outside rearview mirror (side view mirror), head-up display (if equipped) the warning light, warning message, an audible warning and the steering wheel vibration will warn the driver of a collision. It assists in braking control to prevent a collision with a vehicle approaching from the blind spot area.

Collision-Avoidance Assist (whilst departing) will be activated in the following conditions.

  • Your driving speed: Below 3 km/h (2 mph)

  • Speed of the vehicle in your blind spot area: Above 5 km/h (3 mph)

A: Drive carefully

When the vehicle is stopped due to emergency braking, the warning message will appear on the cluster. For your safety, the driver should depress the brake pedal immediately and check the surroundings.

  • Brake control will end after the vehicle is stopped by emergency braking for approximately 2 seconds.

WARNING
  • For your safety, change the Settings after parking the vehicle at a safe location.

  • If any other function's warning message is displayed or audible warning is generated, Blind-Spot Collision-Avoidance Assist's warning message may not be displayed and audible warning may not be generated.

  • You may not hear the warning sound of Blind-Spot Collision-Avoidance Assist if the surrounding is noisy. Always pay attention and keep the vehicle volume at a moderate level.

  • Blind-Spot Collision-Avoidance Assist may not operate if the driver applies the brake pedal to avoid collision.

  • When Blind-Spot Collision-Avoidance Assist is operating, braking control by the function will automatically cancel when the driver excessively depresses the accelerator pedal or sharply steers the vehicle.

  • During Blind-Spot Collision-Avoidance Assist operation, the vehicle may stop suddenly injuring passengers and shifting loose objects. Always have the seat belt on and keep loose objects secured.

  • Even if there is a problem with Blind-Spot Collision-Avoidance Assist, the vehicle's basic braking performance will operate properly.

  • Blind-Spot Collision-Avoidance Assist may not operate in all situations, and even if it works, it may not be able to avoid collisions.

  • Blind-Spot Collision-Avoidance Assist may warn the driver late or may not warn the driver depending on the road and driving conditions.

  • The responsibility for vehicle operation lies with the driver. Do not rely solely on Blind-Spot Collision-Avoidance Assist for driving and always check the surrounding conditions directly and drive safely.

  • Never operate Blind-Spot Collision-Avoidance Assist on people, animal, objects, etc. It may cause serious injury or death.

WARNING

The brake control may not operate properly depending on the status of ESC (Electronic Stability Control).

There will only be a warning when:

  • The ESC (Electronic Stability Control) warning light is on

  • ESC (Electronic Stability Control) is engaged in a different function