Replacing headlamp (Low beam/High beam) (Bulb type)
Operation
-
Before turning off the vehicle, operate the steering wheel in the opposite direction of the lamp to be replaced to steer the tyres toward the inside of the vehicle body.
-
When replacing the right headlamp: operate to the left
-
When replacing the left headlamp: operate to the right
-
-
Turn off vehicle and disconnect the (-) battery terminal.
-
Remove the wheel guard fasteners using a tool and then remove the wheel guard.
-
Remove the socket from the assembly (1) by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly
-
Remove the bulb from the socket by pressing it in and rotating it counterclockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket.
-
Insert a new bulb by inserting it into the socket and rotating it until it locks into place
-
Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly. Push the socket into the assembly and turn the socket clockwise
-
Connect the (-) battery terminal.