Search by Title only
Home > Maintenance > Lamps > Replacing side repeater lamp (Bulb type)

Replacing side repeater lamp (Bulb type)

Operation

  1. Turn off vehicle and disconnect the (-) battery terminal.

  2. Using a screwdriver, gently pry the lamp assembly

  3. Separate the socket and the lens parts by turning the socket counterclockwise until the tabs on the socket align with the slots on the lens part.

  4. Remove the bulb by pulling it straight out.

  5. Install a new bulb in the socket.

  6. Install the lamp assembly.

CAUTION

Be careful not to dirty or damage the lens, lens tab, and plastic housings.