Search by Title only
Home > Hybrid system overview > Charging the plug-in hybrid vehicle > Charging status

Charging status

You can check the charging status at the outside of vehicle when charging or using (it is not driving status) the high-voltage battery.

It takes about 3 ~ 4 hours or more to complete charging.

Classification

Details

Operation of charging indicator lamp

Mode

Status

Charging inlet

Charging button

A

READY

Non-charging state

0 ~ 65 %

On (Yellow)

Off

65 ~ 100 %

On (Green)

Off

B

Aux. Battery Saver/High voltage warning

Charging the 12V auxiliary battery / High voltage warning state

On (Red)

Off

C

Charging

Charging

0 ~ 65 %

Blinking (Yellow)

Off

65 ~ 100 %

Blinking (Green)

Off

D

Charging complete

Charging completed (turns off in 5 seconds)

100 %

On (Green) > OFF

Off

E

Charging failed

Error whilst charging

Blinking (Red)

Off

F

Scheduled charging standby

Reserved charging is operating (turns OFF after 3 minutes)

Off

On

G

Error

CAN communication error status

On (Green) > On (Orange) > On (Red)

Off

Checking charging status

You can check the charging status at the outside of vehicle when charging or using (it is not driving status) the high-voltage battery.

It takes about 3 ~ 4 hours or more to complete charging.

For more information about charging status indicator, refer to More Details.

How to disconnect AC charger

1
The vehicle doors must be unlocked in order to be able to disconnect the charging connector. A lock system prevents charger cable disconnection when the vehicle's doors are locked.
NOTICE

In order to disconnect the charging connector, unlock the doors to unlatch the charging connector lock system. If not, the charging connector and the vehicle's charging inlet may be damaged.

2
Hold the charging connector handle and pull it out.

To prevent charging cable theft, the charging connector cannot be disconnected from the inlet when the doors are locked.

However, if the vehicle is in the charging connector AUTO mode, the charging connector automatically unlocks from the inlet when charging is completed.

If the connector is not automatically unlocked after charging is completed in AUTO mode, the connector is unlocked when all of the doors are unlocked.

For more details, refer to More Details.

NOTICE

When disconnecting the charging connector, do not try to disconnect it by force whilst not pressing the release button. This may damage the charging connector and vehicle charging inlet.

3
Close the charging door by pressing the rear centre edge of the charging door.

* The charging door does not have a locking system.

NOTICE
  • If you cannot open the charging door due to freezing weather, tap lightly or remove any ice near the charging door. Do not try to forcibly open the charging door. If you open it by force, the charging door may be damaged.

  • Do not modify or disassemble the charging cable components. It may cause a fire or an electric shock with personal injury.

  • Keep the charging connector and the charging plug clean and dry. The charging cable should be also kept dry.

  • Use an air gun to blow any foreign substances from the charging connector and the charging plug.