The driver's seat can be adjusted by using the control switches located on the outside of the seat cushion. Before driving, adjust the seat to the proper position so as to easily control the steering wheel, pedals and switches on the instrument panel.

WARNING

The power seat is operable with the ignition OFF.

Therefore, children should never be left unattended in the car.

CAUTION

• The power seat is driven by an electric motor. Stop operating once the adjustment is completed. Excessive operation may damage the electrical equipment.

• When in operation, the power seat consumes a large amount of electrical power. To prevent unnecessary charging system drain, don't adjust the power seat longer than necessary whilst the engine is not running.

• Do not operate two or more power seat control switches at the same time. Doing so may result in power seat motor or electrical component malfunction.

To move the seat forward or backward:

1. Push the control switch forward or rearward to move the seat to the desired position.

2. Release the switch once the seat reaches the desired position.

To recline the seatback:

1. Push the control switch forward or rearward to move the seatback to the desired angle.

2. Release the switch once the seat reaches the desired position.

To change the height of the seat:

1. Pull the front portion of the control switch (1) up to raise or press down to lower the front part of the seat cushion.

   Pull the rear portion of the control switch (2) up to raise or press down to lower the seat cushion.

2. Release the switch once the seat reaches the desired position.

Type A

Type B

The lumbar support can be adjusted by pressing the lumbar support switch on the side of the seat.

1. Press the front portion of the switch to increase support, or the rear portion of the switch, to decrease support.

2. Release the switch once it reaches the desired position.

1. Press the front portion of the switch to raise the cushion extension, or the rear portion of the switch to lower it.

2. Release the switch once the cushion extension reaches the desired position.

To adjust seat bolster:

1. Turn the adjustment switch clockwise, the seatback bolsters will be adjusted inward.

2. Turn the switch counterclockwise, the seatback bolster will be adjusted outward.

3. To maximize the bolster support, use the switch for 8 seconds. After that, the height will not change even if you continue to operate the switch. Release the switch.

1. Push the switch to the front (1) or rear (2) move the leg support upwards or downwards.

2. Release the switch once it reaches the desired position.

The rear seat passenger may use the switches to control the front passenger seat.

Sliding forward or rearward:

• To move the front passenger seat forward, press the switch (1). To move the front passenger seat rearward, press the switch (2).

Angle adjustment:

• To recline the front passenger seat forward, press the switch (3). To recline the front passenger seat rearward, press the switch (4).