Your spare tyre is stored underneath your vehicle, directly below the cargo area.

To remove the spare tyre:

Open the tailgate.
Find the spare tyre fixing bolt cover and remove the cover.

If necessary, separate the tool case only after removing the clamp.
Connect the socket and wheel lug nut wrench.
Use the wheel lug nut wrench to loosen the bolt enough to lower the spare tyre.

Turn the wrench counterclockwise until the spare tyre reaches the ground.
After the spare tyre reaches the ground, continue to turn the wrench counterclockwise, and draw the spare tyre outside. Never rotate the wrench excessively, otherwise the spare tyre carrier may be damaged.
Remove the retainer (1) from the centre of the spare tyre.

To store the spare tyre:

Lay the tyre on the ground with the valve stem facing up.
Place the wheel under the vehicle and install the retainer (1) through the wheel centre.
Turn the wrench clockwise until it clicks.

WARNING

Ensure the spare tyre retainer is properly aligned with the centre of the spare tyre to prevent the spare tyre from "rattling".

Otherwise, it may cause the spare tyre to fall off the carrier and lead to an accident.